{"product_id":"syvecs-pdux4b-as-power-distribution-unit","title":"Syvecs PDUX4B-AS Power Distribution Unit","description":"\u003cp\u003eThe PDUX4B-AS comes equipped with an impressive 34 programmable outputs in total, including 10 extremely capable multifunction outputs which can be defined by the user to operate in either discreet high-side, low-side switching, high-side PWM, Half or Full bridge operation. These flexible outputs, as well as the PDU's 16 input channels and additional 4 low-side PWMs, can be used to expand and enhance the I\/O configuration of any Syvecs ECU. A feature and build-time-choice option are available for an internal IMU and two-wire wheel speed interface respectively.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e34 main power outputs:\u003c\/li\u003e\n\u003cli\u003e10 multifunction outputs configurable as either half-bridge, high side, low side, high side PWM (100Hz-20kHz) outputs. (25A continuous, soft-start inrush limiting 60A, hard-start inrush 60A)\u003c\/li\u003e\n\u003cli\u003e10 high side, two of which can be high side PWM (100Hz-20kHz) outputs. (25A continuous, hard-start inrush 60A)\u003c\/li\u003e\n\u003cli\u003e14 high side, eight of which can be high side PWM (100Hz-20kHz) outputs. (15A continuous, hard-start inrush 30A)\u003c\/li\u003e\n\u003cli\u003eOutput linking (‘teaming’) to support very high current devices.\u003c\/li\u003e\n\u003cli\u003eFour additional low side outputs with configurable PWM (10Hz-10kHz).\u003c\/li\u003e\n\u003cli\u003eAll outputs short circuit and thermally protected with multi-stage in-rush control.\u003c\/li\u003e\n\u003cli\u003eAll outputs additionally protected by physical fuses as required by worldwide regulations.\u003c\/li\u003e\n\u003cli\u003eCombined diagnostic output with reset input.\u003c\/li\u003e\n\u003cli\u003e128 scalable CAN (‘soft’) outputs.\u003c\/li\u003e\n\u003cli\u003eCustom CAN datastream– i.e., customisable channel current, channel state and device information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 physical switch or 0-5Vinputs, including software selectable 3k ohm pull-up resistors\u003c\/li\u003e\n\u003cli\u003e4x inputs capable of programmable “wake up” functionality\u003c\/li\u003e\n\u003cli\u003eComparing and manipulating real numbers (floating point decimal) in schematic\u003c\/li\u003e\n\u003cli\u003eAnalogue inputs can be linearised, viewed as raw voltage or Boolean value\u003c\/li\u003e\n\u003cli\u003eDedicated wake pin\u003c\/li\u003e\n\u003cli\u003e128 CAN ‘soft’ inputs with configurable scaling, validation and debounce time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eComms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x 100Mbit\/s full duplex Ethernet (can be used as Ethernet switch)\u003c\/li\u003e\n\u003cli\u003e3x CAN 2.0B – fully flexible\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eOption for galvanically isolated CAN bus (custom projects only)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eRS232C serial interface (custom projects only)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eLIN Bus (custom projects only)\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree Autosport connectors with a total of 122 pins.\u003c\/li\u003e\n\u003cli\u003eAmphenol SurLok Power Stud\u003c\/li\u003e\n\u003cli\u003eMachined Aluminium enclosure\u003c\/li\u003e\n\u003cli\u003e210x130x57mm (including connectors)\u003c\/li\u003e\n\u003cli\u003e1090 grams\u003c\/li\u003e\n\u003cli\u003eOperating Temperature -40C to +85C\u003c\/li\u003e\n\u003cli\u003e6.5V to 20V Supply voltage (12V option)\u003c\/li\u003e\n\u003cli\u003e6.5V to 30V Supply voltage (24V option)\u003c\/li\u003e\n\u003cli\u003eDedicated logic power input\u003c\/li\u003e\n\u003cli\u003eRegulated 5V sensor supply output with short circuit protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":51147828887847,"sku":"SYV-PDUX4B-AS","price":7125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/7867\/1143\/files\/PDUX4B-AS-2.png?v=1773628165","url":"https:\/\/drivenbywire.com\/products\/syvecs-pdux4b-as-power-distribution-unit","provider":"DrivenByWire Inc.","version":"1.0","type":"link"}